Yantai, Shandong, China
Response Time: < 24h
Response Rate: 0%
| Model No.: CG | Place of Origin: China |
Description of chute feeder
The chute feeder can be installed on the ground or hoisted on the discharge port of ore bin. Trough floor to do reciprocating motion, to achieve ore, its stroke times 20-60 times /min, stroke 20-200 mm. The amount of ore feeding is decided by the stroke size, and the stroke regulation method is as follows: adjusting the eccentricity of the eccentric wheel of the driving device to realize.
The machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals.
1. Simple structure, easy operation, convenient installation and adjustment.
2. Large capacity and high efficiency, less power consumption.
3. Stable vibrating, reliable performance and long working life.
4. Trough bottom plate do reciprocating movement.
The chute feeder used for feed massive material to receiving machinery from hopper, it is widely used to feed large size material (undressed ore and so on) into primary crusher of metallurgy, mine, chemical industry, building, dressing, coal ,and so on.
Technical parameter
